Formazione, convenzioni e ricerche

Formazione:

La Brüel Acoustics ha una lunga esperienza in Corsi, Seminari e Giornate di Lavoro per l'informazione e la formazione dei responsabili aziendali per la sicurezza, per i lavoratori, per i tecnici specialistici.

La sicurezza sul lavoro è un problema per tutti.

I decreti Legislativi 626/94 e 242/96 sanciscono che la sicurezza è:
- UN DIRITTO DEI LAVORATORI;
- UN OBBLIGO PER I DATORI DI LAVORO;
- UN COSTO CHE POSSIAMO TRASFORMARE IN INVESTIMENTO PER LE AZIENDE

La Brüel Acoustics si avvale di un corpo docente ai massimi livelli, proveniente da Università ed Istituzioni.

Contattateci per informazioni e preventivi gratuiti.


Convenzioni:

La Brüel Acoustics ha stipulato convenzioni e progetti di ricerca con Enti ed Associazioni non Profit.


Corsi di aggiornamento e formazione in convenzione con EuroAcustici.

EuroAcustici e l'Università ROMA TRE organizzano il SEMINARIO - CONVEGNO
"IL PERICOLO RUMORE: l'Accettabilità e la normale Tollerabilità all'immissione di Rumore e Vibrazioni nelle abitazioni"
lunedì 27 giugno 2005 - ore 09-16 - Aula Magna del Rettorato dell'Università Roma Tre, via Ostiense 161, Roma


Ricerche:

Research Proiect

Acoustical Absorption as Function of Angle of Incidence and Distributing of Material
As already mentioned BA think that reverberation time RT is not the best parameter for describing the acoustical quality of a room due to the large spreading in the measurement of RT.
Consequently, to determine the absorption as function of frequency, by using the ISO standardized methods, is a very doubtful business.
BA prefer to evaluate absorbing material with a SWT which give a very precise value for perpendicular incidence.

BA have already confirmed some theoretical results for or as function of the angle of incidence, see fig. 1.
We can therefore already now, as seen, convert results measured with a SWT to any angle of incidence or to diffuse field.
We have also some preliminary results for the increase in absorption when the absorbing material is divided.
It can be seen that the absorption per m2 increase when the material is set up in smaller areas. But these latter results will be further investigated in a future research project.

BA have already used these preliminary results for developemnt of AcoustiCone 61BA and AcoustiCassini 61BB.

With these results in hand we have a cheap and fast method to develop and optimize absorbing material.




® Tutti i diritti riservati dal 1995 a oggi,
SI AUTORIZZA LA COPIA E LA DIFFUSIONE CON CORTESE RICHIESTA DI INDICARE LA FONTE ( www.bruel-ac.com ) e l'E-Mail: bruel@mclink.it
Prof. Mario Mattia.

® Web masters Mario & Paolo Mattia - updated on February 2003, Web Master
On line from 1995 November 10